Wood Stairs – There’s More Than What You Know Already On This Site..

If you are purchasing a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will likely arise regarding the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters fitted when the stair is finished?

Here are some things to consider with Railing Installers Hamptons: Your painter will normally opt for painting the balusters before installation. This allows them to be sprayed as opposed to brushed and eliminates a lot of “cut-in” work.

Painting balusters separately also means the stair installers will have to revisit the site, take away the railings and install the balusters. There will be charge with this “second trip” to the jobsite. You will have to make sure to schedule this “second trip” in coordination using the completing the conclusion.

Leaving your balusters out for painting implies that they will probably be lost or stolen during this time period. You will be accountable for balusters left on the jobsite. Once the painted balusters are finally installed, there will be additional “touch-up finishing required at the rail joints. Holes will need to be filled and stain and finish re-applied for the last finish.

Plan installing of your hardwood stair for after your drywall continues to be taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray could make the stair finishing process very hard and might make desired results impossible to attain.

Most hardwoods are a wide open grain wood and once dirt gets a part of open grain it is quite difficult to remove, despite having sanding. This will use a negative effect on the appearance and texture in the finish. Care also must be used to guard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic will not allow airflow, trapping moisture underneath and resulting in the wood to grow and contract. This expansion and contraction causes the wood joints to open up and may cause the wood to crack.

The environmental conditions inside the house are important to the quality of the stair. Hardwood lumber continues to be dried through a very controlled process with an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to remain stable under normal conditions.

In cold climates, when a property is heated to your high temperature in the wintertime, the environment could become very dry, causing the wood to shrink. This shrinkage can make cracks visible in the wood and joints may start to open up. Subjecting a stair to high levels of heat is similar to putting it in an oven and definately will accelerate the deterioration of the stair.

All hardwoods has to be sealed on all sides to retard movement and protect from exposure to elements and damage. It is strongly recommended to seal wood immediately.

Leave a Reply

Your email address will not be published. Required fields are marked *